Click to enlargeGenerator Start Controller
Mini Model from Atkinson

Atkinson Generator Start Controller Model: GSCM-Mini

Charge your off grid batteries with a generator start controller from Atkinson.

Off-grid Atkinson GSCM (generator start controller module) is a microprocessor-based generator-starting controller that receives start commands from the 12-volt output from an OutBack FX inverter auxiliary relay, user-supplied switch, an auxiliary relay in an inverter, voltage controlled relay, timer or any user-supplied contact.

Generator start controller automatically controls a gas/propane or diesel powered generator or pump, and is totally sealed for harsh environments to begin charging your batteries.

Advanced GSCM provides contact signal relays to start the engine and disconnect the starter when a minimum generator frequency output is measured. It monitors the generator operation, shutting it down if one of several fault conditions is detected. LEDs are flashed to indicate the cause of the shutdown. Manually resetting the GSCM removes the lockout and allows the generator to restart if called. The GSCM is powered by 12 to 24 VDC from a battery bank and will start generators for 12 to 48V systems.

For your 48 VDC battery systems the GSCM must be powered by a 24 Volt or less tap on the 48 VDC battery bank.

2-year limited warranty.

Dimensions: 5.5" x 3.3" x 1.5"

Weight: 5 lb.

Generator Start Controller - Mini 020-06343Retail Price: $279.00Sale Price: $259.00