Solar grid tie combiner box for 6 solar strings. Wire PV panels in high voltage for solar grid tie net metering. Wire PV panels up to 250 VDC. MidNite Solar Combiner Box Model: MNPV6-250D
Maximum Output Wire Size: #1/0
Maximum Number of 150 VDC Breakers: 0
Maximum Number of 300 VDC Breakers: 3
Maximum Number of 600 VDC Breakers: 0
Maximum Output Circuits: 1
Attractive powder-coated aluminum rainproof array combiner boxes accept DIN mount 150 V circuit breakers, MidNite 300 VDC breakers, or 600 VDC fuse holders for solar grid-tie PV arrays. Hard attractive plastic cover provides a dead-front for safety. Knock out for either breakers or fuse holders.
Grid tie solar combiner box sports both negative busbar and ground bar. The aluminum NEMA 3R enclosures are approved to be mounted angles from 90 to 14 degrees (14 degrees = 3/12 slope). Listed to UL 1741 for the U.S. and Canada.
The Solar PV grid tie MidNite Disco line of PV combiners with disconnects incorporates NEC 2011 requirements. The colorful disconnect handle is bright red for visibility and can be locked in the off position.
Combiner box can be configured for bi-polar or ungrounded inverters where both the positive and negative legs of the array need circuit protection. Models are available for 150 VDC, 300 VDC, 600 VDC, or 1000 VDC arrays.
Grid tie combiners are made from powder coated aluminum for corrosion and sunlight resistance for long life in harsh conditions. Sports clear see-through dead front is supplied with all disco combiners. Models are available with either NEMA 3R or NEMA 4X ratings.
Grid tie combiner box comes with a shunt trip disconnect that enables the MNDiscoPSB to trip the disconnect remotely. An MNSPD-600 is included.
Dimensions (Inches): 12.7 x 12.2 x 7.5
Weight: 6 lbs.