European voltage 230 VAC 50 Hz. Single phase output from stacked inverters. Off-grid power center rated at 6,000 watts AC. Battery charging voltage 24 VDC. OutBack FLEXpower Two 6 Kw Power Center for 24 VDC. Power center model FP-2-24. This Model for International Voltage 230 VAC 50 Hz.
OutBack FLEXpower Two Power Center Model: VFX3024E
Battery Voltage: 24 VDC
AC Output Voltage: 230 VAC/50 Hz
Continuous Power Rating: 6,000 Watts AC
Use REC Solar PV panels 250 watts 24 VDC for charging your batteries. Use Air X, Air 30, Air 40, and Air Breeze Marine wind generators for charging your batteries. Whisper 100 rated at 900 watts makes a great battery charger for your 24 VDC battery bank.
European voltage solar off grid FLEXpower TWO wired power panels integrate two inverter/chargers and all of the essential protective devices in an easy-to-install, fully integrated and factory tested system.
Solar off grid European voltage 230 VAC 50 Hz. The Off grid FLEXpower TWO can be used for either grid-tied or off-grid applications. Ideal for medium sized power requirements such as homes, light commercial or larger back-up power systems. Utilizing a compact design and an easy-to-install mounting plate, the FLEXpower TWO System can be mounted in either a horizontal or vertical orientation to allow installation in more space-limited locations.
Each solar off grid European voltage FLEXpower TWO includes two inverter/chargers, AC and DC wiring boxes, a MATE2, HUB, and AC/DC Surge Protector. Inverter breakers and an AC Input-Output-Bypass Assembly are pre-installed on the FLEXpower TWO. There are also mounting locations for an AC GFDI Type B style outlet and additional DC and AC breakers. Optional kits are available for charge-controllers and DC system monitoring. The optional charge controllers are shipped with the power panel but not installed.
OutBacks control wiring option comes with a Solar PV module array input breaker and wiring installed for one charge controller. For each charge controller required, order one charge control option, one control wiring option, and an applicable GFDI option. For one charge controller, the single pole GFDI will work; for 1 or 2 charge controllers, use the 2 pole GFDI.
OutBack MATE3 option substitutes a Mate3 instead of a Mate 2.
FLEXpower TWO components are Listed to applicable UL standards for a code compliant installation.
Dimensions: 46.5 x 20.25 x 13 inches.
Weight is 232 lbs.