Off grid stacked inverter power center. Rated at 7,200 watts AC output. Single phase 120/240 VAC 60 Hz. Inverters rated at 3,600 watts AC are stacked for 7.2 Kw AC output. Off grid power center is ideal for solar PV and wind generator battery charging systems. Remote solar and iwnd home power systems. OutBack FLEXpower Two 7.2 Kw Power Center for 48 VDC FP1-10.
OutBack FLEXpower Two Power Center Model: VFX3648
Battery Voltage: 48 VDC
AC Output Voltage: 120/240 VAC
Continuous Power Rating: 7,200 Watts
OutBacks off-grid FLEXpower TWO factory wired power panels integrate two inverter/chargers and all of the essential protective devices in an easy-to-install, fully wired and factory tested system.
Battery charging voltage 48 VDC. Use REC Solar PV panels 250 watts 24 VDC in series for 48 VDC battery charging. Whisper 100 wind generator rated at 900 watts ideal for battery charging 48 VDC.
Off-grid power center for solar PV and wind power 7,200 watts AC. Off grid FLEXpower TWO is applicable for either grid-tied or off-grid applications with medium sized power requirements such as homes, light commercial or larger back-up power systems.
OutBack uses compact design, and easy-to-install mounting plate. Off grid FLEXpower TWO System can be mounted in either a horizontal or vertical orientation to allow installation in more space-limited locations.
Solar and wind off grid FLEXpower TWO power center includes two inverter/chargers, AC and DC wiring boxes, a MATE2, HUB, and AC/DC Surge Protector. Inverter breakers and an AC Input-Output-Bypass Assembly are installed on the FLEXpower TWO.
Mounting locations for an AC GFDI Type B style outlet and additional DC and AC breakers. Optional kits are available for charge controllers and DC system monitoring. The optional charge controllers are shipped with the power panel but not installed.
Control wiring option comes with an array input breaker and wiring installed for one charge controller. For each charge controller required, order one charge control option, one control wiring option, and an applicable GFDI option. For one charge controller, the single pole GFDI will work; for 1 or 2 charge controllers, use the 2 pole GFDI. The MATE3 option substitutes a Mate3 instead of a Mate 2.
FLEXpower TWO components are Listed to applicable UL standards for a code compliant installation.
Dimensions are 46.5 x 20.25 x 13 inches.
Weight is 232 lbs.