Solar and wind off grid power center 7,200 watts AC. Single phase inverter output 120/240 VAC 60 Hz. Stacked 3,600 watt inverters produce 7,200 watts of AC power. Battery charging voltage 48 VDC.OutBack FLEXpower Two 7.2 Kw Power Center for 48 VDC FP2-29.
OutBack FLEXpower Two Power Center Model: GVFX3648
Battery Voltage: 48 VDC
AC Output Voltage: 120/240 VAC
Continuous Power Rating: 7,200 Watts AC
Solar PV panels REC Solar 250 watt 24 VDC in series for battery charging. Power center integrates the charge controller, battery charging, and inverter output. Single phase AC 120/240 VAC output. All fusing and disconnects included and wired.
Solar FLEXpower TWO pre-wired power panels integrate two inverter/chargers and all of the essential protective devices in an easy-to-install, fully pre-wired and factory tested system. The FLEXpower TWO is applicable for either grid-tied or off-grid applications with medium sized power requirements such as homes, light commercial or larger back-up power systems. Utilizing a compact design and an easy-to-install mounting plate, the FLEXpower TWO System can be mounted in either a horizontal or vertical orientation to allow installation in more space-limited locations.
Solar off grid battery charging 48 VDC FLEXpower TWO includes two inverter/chargers, AC and DC wiring boxes, a MATE2, HUB, and AC/DC Surge Protector. Inverter breakers and an AC Input-Output-Bypass Assembly installed on the FLEXpower TWO.
Included mounting locations for an AC GFDI Type B style outlet and additional DC and AC breakers. Optional kits are available for charge controllers and DC system monitoring. The optional charge controllers are shipped with the power panel but not installed.
Control wiring option comes with an array input breaker and wiring installed for one charge controller.
For each charge controller required, order one charge control option, one control wiring option, and an applicable GFDI option. For one charge controller, the single pole GFDI will work; for 1 or 2 charge controllers, use the 2 pole GFDI. The MATE3 option substitutes a Mate3 instead of a Mate 2.
FLEXpower TWO components are Listed to applicable UL standards for a code compliant installation.
Dimensions are 46.5 x 20.25 x 13 inches.
Weight is 232 lbs.