Solar Surge Protection Device.
MidNite Solar Surge Protection Device Model: MNSD-150
Off grid MidNite Solar Surge Protector Device (MNSPD) is a Type 2 device designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Protect your solar array system up to 150 VDC.
Off grid MidNite Solar SPD is offered in three voltages to maximize the required protection level.
Protection reduces clamping voltage to a safe voltage which your system can sustain without damaging the electronics. The MidNite Solar SPD voltage rating should be chosen according to the nominal voltage of the system.
Two LEDs in each unit that will indicate when the unit is functioning correctly and there is voltage to it.
Install the 150 VDC version for surge protection on wires coming from a 12/24/48 VDC PV array, DC wind generator or DC hydroelectric turbine. Lightning protection can be installed in a combiner box, DC load center, or grid-tie inverter. Protect your solar PV array up to 150 VDC.
Solar Surge Protector devices can be used on your AC load center to protect your equipment from surges from the utility lines and on AC wiring running outside of the building, to generators, to pumps or to outbuildings. These surge protectors mount in a 0.5" knockout and are covered by a 5-year material workmanship warranty.
Weight: 7 lb.