Solar Surge Protection Device.
MidNite Solar Surge Protection Device Model: MNSD-300
Nominal DV Voltage Range: 0-300 VDC
Nominal AC Voltage: 120/240 VAC
Off grid MidNite Solar Surge Protector Device (MNSPD) is Type 2 device designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Advanced MidNite Solar SPD is offered in 3 voltages to maximize the required protection level. Protection is achieved by reducing the clamping voltage to a safe voltage that your system can sustain without damaging the electronics.
Off-grid MidNite Solar SPD voltage rating chosen according to the nominal voltage of the system. Two bright LEDs in each unit indicate when the unit is functioning correctly and there is voltage.
Install the 150 VDC version for surge protection on wires coming from a 12/24/48 VDC Solar PV panel array, DC wind generator or DC hydroelectric turbine. The 300 VDC unit works well for larger systems with sources up to 300 VDC. 600 VDC unit is designed for high-voltage grid-tie PV arrays. Lightning protection can be installed in a combiner box, DC load center or grid-tie inverter.
Off grid Solar Surge Protector devices used on AC load centers to protect equipment from surges from the utility lines and on AC wiring running outside of the building, to generators, to pumps or to outbuildings.
Weight: 8 lb.