Solar Surge Protection Device.
MidNite Solar Surge Protection Device Model: MNSD-600
Nominal DV Voltage Range: 0-600 VDC
Nominal AC Voltage: 480 VAC
Grid tie solar MidNite Solar Surge Protector Device (MNSPD) is a Type 2 device designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
MidNite Solar SPD is offered in three voltages to maximize the required protection level. Protection is achieved by reducing the clamping voltage to a safe voltage that your system can sustain without damaging the electronics. The MidNite Solar SPD voltage rating should be chosen according to the nominal voltage of the system.
Two bright LEDs in each unit will indicate when the surge protector is functioning correctly.
Install 150 VDC version for surge protection on wires coming from a 12, 24, or 48 VDC PV array.
Works for DC wind generator or DC hydroelectric turbine. The 600 VDC unit is designed for high-voltage grid-tie PV arrays.
Lightning protection can be installed in a combiner box, DC load-center or grid-tie inverter.
Grid tie Solar Surge Protector devices can be used on your AC load center to protect your equipment from surges from the utility lines and on AC wiring running outside of the building, to generators, to pumps or to outbuildings. These surge arrestors mount in a ½" knockout and are covered by a 5-year material and workmanship warranty.
Weight: 9 lb.