Solar PV panel charge controller for 12/24 VDC battery charging. Charge your 12/24 VDC battery bank up to 35 Amps. Xantrex Charge Controller Model: C-35
Excellent Charge Controller for your battery bank or battery using 12 VDC or 24 VDC.
Xantrex C-35, C-40, and C-60 PWM (pulse width modulator) charge controllers can be used as PV charge controllers, DC load controllers or DC diversion regulators in 12 and 24 VDC systems (only the C-40 can also be used in 48 VDC systems).
Two charge controllers can be used together to provide multiple functions. As DC load controllers they disconnect the load at a user-settable low voltage and reconnect at a higher voltage reconnect point. As diversion controllers they send excess power to a diversion load (See Controls and Relays) to regulate hydroelectric or wind generators.
Charge Controllers protect your battery bank from Discharging too deeply.
The maximum current throuhput is reduced by 25% when used in diversion mode. All Xantrex charge controllers have field-adjustable bulk and float set points and perform automatic equalization every 30 days or whenever low-voltage disconnect (LVD) is reached. Equalization can be manually initiated with automatic shut-off. The optional temperature sensor can be used to increase accuracy of the control algorithms. The optional LCD digital display shows battery voltage, array amps and watts, cumulative amp-hours and a separate resettable "trip" amp-hour measurement.
Charge controller equipped with a digital display can be mounted on the front of the charge controller, or with a cable for remote mounting in a double-gang electrical box up to 100 feet away.
These charge controllers are Listed to UL 1741 and CSA 22.2 No 107.1-95 and covered by a 2-year warranty.