Solar PV Panel and Solar Module Array Battery Charging Charge Controller Xantrex Model: XW-MPPT60-150
The XW-MPPT60-150 can be used with PV arrays with voltages ranging from battery voltage to 150 VDC and can support an output of up to 60 amps into the battery for battery voltages of 12 to 60 VDC. Maximum power point tracking (MPPT) maximizes energy harvest and provides increased flexibility in module selection and string sizing.
A large aluminum heat sink eliminates the need for an internal fan for added reliability. Built-in ground fault protection (GFP) eliminates the need for a separate GFP breaker. The XW-MPPT60-150 can be mounted on the side or top of the XW power distribution panel, or used stand-alone in other PV systems. The front panel features a 2-line 16-character display and four buttons for configuration and system monitoring. A battery temperature sensor is included with the controller.
The charge controller has a configurable single-function auxiliary output (producing 5 to 13 VDC at 200 mA) that can drive a realy for lad control or activate devices, such a vent fans or indicator alarms.
The XW-MPPT60-150 is able to communicate its settings and activity to other Xanbus-enabled devices, such as the XW Series inverter/charger, the System Control Panel II (SCP), XW Automatic Generator Start (XW-AGS), and other Xantrex XW-MPPT-60-150 solar charge controllers through the Xanbus network.
The dimensions of the XW-MPPT60-150 are 14"H x 5"W x 5"D, weight is 12 lb.
Charge controller is covered by a 5-year warranty with an optional extension to 10-years. Listed to UL 1741 for the U.S. and Canada.